For a Variety of Applications
Designed for optimum use in residential, commercial and battery charging applications, the GEPV-110-M solar module contains 36 single-crystal cells connected in series, and generates a peak power of 110 watts at 16.7 volts.

 
 
 
 

Features & Benefits


 
 

 Exacting tolerances of ±5 percent ensure the module satisfies maximum rated power output
 Robust, lightweight anodized aluminum frame with pre-drilled holes for quick installation
 Engineered for the most rugged environments including hail, snow and ice storms
 Can be purchased with or without industry standard multi-contact connectors

Electrical Performance

  

GEPV 110W

GEPV 165W

Panels
 

Typical Performance Characteristics

  
 

Peak Power (Wp)

  

Watts

  

110

  
 
 

Maximum Power Voltage (Vmp)

  

Volts

  

16.7

  
 
 

Maximum Power Current (Imp)

  

Amps

  

6.6

  
 
 

Open Circuit Voltage (Voc)

  

Volts

  

21.2

  
 
 

Short Circuit Current (Isc)

  

Amps

  

7.4

  
 
 

Short Circuit Temperature Coefficient

  

mA/&degC

  

+3

  
 
 

Open Circuit Voltage Coefficient

  

V/&degC

  

-0.08

  
 
 

Maximum Power Temperature Coefficient

  

%/&degC

  

-0.5

  
 
 

Maximum Series Fuse

  

Amps

  

15

  

I-V parameters are rated at standard test conditions (irradiance of 1,000 W/m, AM 1.5G, cell temperature 77° F / 25° C). As with all single-crystal PV modules, light-induced degradation may cause the module power to decrease about three percent from the typical maximum during the stabilization process that occurs during the first few days in service. All measurements are guaranteed at the laminate leads.

Physical Characteristics

Overall Physical Properties

Length

  

58.1 inches (1,477 mm)
 

Width

  

26.0 inches (661 mm)
 

Depth of Frame

  

1.4 inches (35 mm)
 

Depth Including J-box

  

2.2 inches (55 mm)
 

Connector Length (when applicable)

  

15.0 inches (381 mm)
 

Weight

  

26.1 pounds (11.9 kg)
 

Mounting Hole Locations
 

Center Spacing

  

25.3 inches (643 mm)
 

Edge Distance

  

16.4 inches (417 mm)
 

Width Spacing

  

24.3 inches (616 mm)
 

Mounting Hole Diameter

  

0.26 inches (6.7 mm)
 

Physical Design Properties
 

Weight (Wind) Bearing Potential

  

50 lb/ft (125 mph equivalent)
 

Hailstone Impact Resistance

  

1 inch at 50 mph (25 mm at 80 kph)

up   next     back

Questions?

Just send a short email or call,  and our professional team will contact with you soon, helping you get the right information.

Call: (809) 248-2580  or  (809) 768-4073

or send mail